Pyronix Matrix 832 Bedienungsanleitung PDF herunterladen (Seite 54)

Matrix User Guide

Page 50 RINS915-2

7.2.2 Disarming the Panel

Present a pre-programmed card or tag to the MX-Prox reader for 1 second (wait until the proximity reader

beeps).

The operation LED will turn off indicating that you are in arm/disarm mode.

Remove the card to disarm the panel.

7.3 Multi-Partition Operation

The MX PROX has four status LEDs. In multi partition operation these four LEDs display the partition number,

1,2,3 or 4.

PROXIMITY READER

Operation

STATUS LEDS

PARTITION 4 (ORANGE LED)

PARTITION 3 (GREEN LED)

PARTITION 2 (YELLOW LED)

Partition 1 (Red LED)

7.3.1 Arming the Panel

Present a pre-programmed card or tag to the MX-Prox reader for a pre-determined time period (each second is

indicated with a beep).

The operation LED will turn off indicating that you are in arm/disarm mode.

Presenting the card for 1 second will select partition 1 (RED LED illuminates).

Presenting the card for 2 seconds will select partition 2 (YELLOW LED illuminates).

Presenting the card for 3 seconds will select partition 3 (GREEN LED illuminates).

Presenting the card for 4 seconds will select partition 4 (ORANGE LED illuminates).

(This cycle will repeat a number of times or until you remove the card from the reader)

Remove the card to start arming the currently selected partition.

The partition will start arming in arm mode A and a high tone counting the exit time will be emitted.

Repeat to arm more partitions.

Presenting the card

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 62 63

Keine Kommentare

Pyronix Matrix 832 Bedienungsanleitung Seite 54