Pyronix PCX 256 Bedienungsanleitung PDF herunterladen (Seite 14)

sing a Tag Reader

If you have a tag reader installed, then it will be possible to arm and disarm the PCX system

using a tag (the same tags can also be used to arm/disarm via the keypad prox).

There are two types of readers that can be used with the PCX system - the Internal Tag

Reader (used for indoors only) and the External tag reader (used for both indoors and

outdoors).

Assigning tags for the readers needs to be programmed through the ‘Change Codes’

function in the Master Manager Menu (see page 17). The internal and external readers

can be both assigned to individual arm modes/partitions, this will need to set up by your

engineer.

Enabling the readers to the PCX system will be done by your engineer.

To arm/disarm the PCX system using the Internal

Tag Reader, present a pre-programmed tag to the

tag symbol as shown.

The PCX system will then arm depending on the

type of exit mode programmed (Final door, Timed

or Push to set)

To arm/disarm the PCX system using the external

Tag Reader, present a pre-programmed tag to the

centre of the prox.

The PCX system will then arm depending on the

type of exit mode programmed (Final door, Timed

or Push to set)

The LEDs on the Prox may also be programmed, to

do this please contact your engineer.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Keine Kommentare

Pyronix PCX 256 Bedienungsanleitung Seite 14