Pyronix PCX 256 Bedienungsanleitung PDF herunterladen (Seite 16)

dvanced Functions

The chime can be used for any input on

the PCX system. This can be set up by

your engineer.

To enable the chime on the keypad,

when the time is displayed, press the

c key, a ‘c’ will be displayed on the

right side of the keypad display.

If an emergency alarm is needed, press

and hold both the 1 and  keys. A

‘hold up’ alarm will be generated.

Note: The Hold Up facility needs to be

enabled by your engineer (either silent or

full alarm)

On occasion, a detector may need to

be isolated if a room is occupied.

Note: Inputs have to be programmed as

‘omittable’ by your engineer for this feature to

operate.

Chime Feature

Keypad Hold Up

Omitting Inputs

Alarm Silenced

2 Key HU

Omit Inputs?[01]

Input 01

Pyronix

Time 10:45 c

Enter your user code >

Press the > t key

Select the inputs that need to be omitted >

Press the > x key

After 10 seconds the exit time continues >

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Keine Kommentare

Pyronix PCX 256 Bedienungsanleitung Seite 16